Opel Plus Keystone
One Fireplace, Two Looks
Description
As part of the growing Opel family, the Keystone is the result of fine craftsmanship, inspired by versatility and built on more than 30 years’ of proven performance with high efficiency wood–burning fireplaces.
The Keystone name comes from the interchangeable keystone facing that is offered either as a semi-clean look or as a full faceplate, adding modern sophistication and design choices to any mid-sized space.
Low Emissions – High Performance
- Semi-clean face option (requires two gravity vents for heat output)
- Full Keystone facing for maximum impact
- EPA Certified to comply with 2020 particulate emission standards at 0.7 g/hr. (with the 635cfm Central Heating Blower option)
- Large 3.6 cubic feet firebox allowing overnight burns.
- BTU Output range 10,000 to 70,000
- Heating capacity up to 3000 ft2
Options
AVAILABLE OPTIONS
Opel+ Keystone Louver (Top)
The Top Louver for the Opel+ Keystone is a required option when the top louver is not blocked on the fireplace.
Gravity Vent Kit
The gravity vent kit uses natural convection to distribute the heat generated by the fireplace to the same floor and/or floors above the fireplace.
Gravity Vent Kit – Rectangular
The gravity vent kit uses natural convection to distribute the heat generated by the fireplace to the same floor and/or floors above the fireplace.
Internal Blower
The internal blower kit will increase the circulation of heated air in the room where the fireplace is installed.
Central Heat Blower Kit
The central heat blower kit enables the distribution of heat generated by the fireplace throughout many rooms and different floors using either dedicated ducts or the house central heating ducts.
Central Heating Tee
This Tee allows you to have two Gravity Vents (FO-V2) on your fireplace and still be able to install the Central Heat option (FO-FDHB6-1).
Heat Dump
The Heat Dump Kit contains all the parts necessary to circulate a moderate amount of heat from your fireplace to another room with a small fan.
Rock Retainer Kit (Opel Keystone)
This rock retainer kit will allow you to finish your Opel fireplace with thin non-supporting facing such as tiles.
Masonry Chimney Adapter
This adapter will attach to the liner with 3 stainless steel rivets (provided) and to the EXCEL chimney with 3 screws (provided).
Specifications
DOCUMENTS AND SPECS
Opel Plus Keystone
Note: The installation manual should always be used for the precise planning and accurate installation of your fireplace.
| GENERAL SPECIFICATIONS | |
|---|---|
| Outside Dimensions | 36 7/8″ W X 52 1/4″ H X 24″ D |
| Shipping weight | 605 lb |
| Glass viewing size | 22 ½” W x 14 7/8″ H |
| Firebox Size | 3.6 cubic feet Based on overall firebox dimensions, EPA official firebox dimensions are smaller. |
| Firewood Length | 18″ |
| Chimney | 7″ Excel |
| Door Finish | Black |
| Outside Air | 4″All RSF models come equipped to accept a 4″ outside air duct, a 5″ can also be used. All models can also be installed to operate using room air. |
| Mobile Home Approved | NO |
| PERFORMANCE | |
|---|---|
| EPA Certified | 0.7 g/hr |
| Optimal Efficiency | 80% LHV Low Heating Value (LHV), using data generated under the best circumstances and CSA B415.1-10 calculations. |
| EPA Average Efficiency | 70% HHV High Heating Value (HHV), using data from EPA crib wood testing and CSA B415.1-10 calculations. |
| BTU Output Range | 10,000 to 70,000 Actual BTU output depends on many factors, but primarily on the quality of the wood burned. |
| Heating Capacity | 1,500 to 3,000 ft2 Depends primarily on wood quality, ambient air temperature and building heat loss. |
